DUNCAN DUNCAN RENOVATOR MK3

The Duncan Renovator is the bench mark in direct drills. They run the well known 1" coil tines with the 'Inverted Tee' or 'Baker boot' and the 'Amazon' peg roller boxes with accurate seeding from under a kilogram/hectare to over 300 kg/h.
With 3 bar stagger for the tines and the option of disc-openers, these are an excellent trailing drill for the hardest direct drilling or in worked ground.

This is a 19 run machine with 2 boxes and disc openers Boots and points all in very good order. Complete with lighting kit, and ram on draw-bar. Sold with operators manual and electronic hectre-metre.

Greased and lubricated chains and sprockets
Service notes, replaced 6x tungsten tines with new ones, tightened both wheel bearing kits. Replaced grease nipples where required. Gave machine full grease and waterblast. Operation all ok.


Due to our central location, we specialise in freighting machinery across New Zealand with a strong focus on the North Island. Get in touch today!

Contact NC Equipment/Mech Agriculture 06 356 8781, manawatusales@ncequipment.co.nz