Farm Machinery for Sale

14' blade, 20.0 t, 11 spd, 256 hp, 2340 machine hrs, rear rippers, pushblock, Joysticks w/ steering wheel, 6 WD, on 17.5R x 25's

Good order. Surplus to requirements. All reasonable offers considered. Rego on hold until 31/7/2016

TITAN 4500 professional roller drill NZ's highest spec. roller drill now available in 4.5m to suit smaller tractors and steep hill country, with all the leading features of the bigger models. Speed up your roller drilling and get the ultimate crop strikes - 4.5m working width, 2.8m transport width (vertical fold, with hyd. safety locks) - 4050kg weight - 540/570mm GGG50 DuraForge® cast steel rings - DuraForge® cast steel bearing housings - TitanLoc® axle security system (spanners included) - Hydraulic parking stand (independent, on-board reservoir) - Central mounting of seeder, fold down access steps and seed loading platform - Superstrike® chain covering harrow system (hyd. lift/lower) - 400/60-15 oversize wide transport wheels - 2.8m wide wheelbase (increased stability during transport) Polythene mudguards (flexible) - APV PS 500 airseeder (hydraulic fan, 500ltr hopper) - 16 outlet seed distribution - APV 5.2 drill controller (full functionality/calibration from cab) - Radar ground metering for sowing rate - Road lighting and NZ spec hazard panels front/rear - Phone for details and infopack - Free delivery/install nationwide (in stock) - Trade-in your old machine

2008, done 35000 bales, new chains & slats recently, very good condition, $43000+gst ono.

19 Run single box, Front disc coulters with new bearings, Very tidy machine, Hasn't done a lot of work, Workshop checked/ serviced, Bonus - This machine is part of the REVIVE range, which means you get... - 75 point quality check - 3 month warranty Because of our central location we specialise in freighting machinery NZ wide - especially North Island - enquire now! For more quality used machinery, check out www.mechs.co.nz

Bale count 39,000 One owner located at the Hawera Branch Contact Raymond 027448861

Good SH condition. $4,800 + GST

Mono effluent pump model. 18 months old. Purchased for 40k. Also included in price is a 18.5KW variable speed drive worth 4.5k new. Motor and drive in top condition. Worst case scenario, the pump will need 10.5k to service as is, quoted price. The pump was not suited for application

PRODUCE MORE PASTURE FOR LOW COST! - One of the simplest ways to increase grass production - Breathe life into your soil - Oxygen, water, nutrients straight to the root zone - Reduce ponding/runoff of effluent irrigation - Aerate and fracture ground to increase water movement in both directions(drainage and uptake of pasture) - Simple, fast, low cost (diesel/labour), easy to use - Dual purpose machine (aerator in summer/autumn, pugging roller in spring) - Designed for harsh NZ conditions (Stones etc.) - Suit contractor or large scale pastoral farmer - Phone our product specialists for demo of this impressive unit, ticks all the boxes. Staggeringly simple and effective tool to improve your sward growth and paddock surfaces all year round. Low interest finance deals to approved purchasers. - 3.0mtr working width - 3.1mtr transport width - 8-16km/h operating speed (up to 4.0-4.5ha/hr throughput) - 1020mm diameter drum, 20mm wall thickness (6.0t total weight with additional weight pack, plus water fill, lowest operating weight 4.0t) - Aerating blades made from 15mm Hardox 700 plate (crack down to 300mm deep fracture in summer/autumn months) - Heavy duty drum bearings (greaseable) - 2 point hitch connection to tractor (Cat. 2) (full swivel in both directions) - 550/45-22.5 oversize wheels (safe stable road transport at 40-50kmh) - Road lighting kit - Hazard panels front and rear (NZ-spec.) - Soft-Ride accumulator on back transport ram (protects ram during transport) - Includes 500kg ballast plate kit - We can arrange freight nationwide

4AG TITAN DV930 Offset Discs. 3.0m working WIDTH, 2050 KG weight, 610 mm (24") blades, hydraulic cut adjustment, patented 'Terraflex' bearing mount system, European engineering and steel quality combined with NZ design DNA and 12 years of in-field proving. Over 2 tons in weight so good penetration in most soil types for both primary abnd secondary discing, ideal for hill country and suited to 85-140Hp range. The industry leading 'Terraflex' bearing system is identical to 6 ton discs doing thousands of hectares/year no other bearing system comes close, buy with confidence and peace of mind of the 2YR bearing warranty. Phone 4AG today on 0800 424 100 and speak to one of our cultivation product specialists to ensure you get exactly the right machine/model for your needs, or visit 4AG.CO.NZ to see the gear in action...