- List your item for as low as $10 - Advertise your item in both print and online
More Information
The Valtra T234 and Fendt 720 S4 are widely acknowledged as being kitted out with some of the best technology and performance on the market+MORE
Trade Safely. Use our anti-scam guide to protect yourself.
show
results
Sorry, map view is not available right now. Please search by seller location to enable map view.
20.0 t, 14' blade, 2690 hrs only, 6x6 WD, 225 hp & 8 spd, rippers, scarries, pushblock, on new radials, extra tidy
20.0t, 14' blade, 3765 hrs, 275 hp, rippers & pushblock, accumulators, 17.5Rx25 radials 90% fronts & 65 % rears
Kubota/Neilo Tractor Grader Combo for the ultimate tool in the construction, sealing and maintenance of roading and car parks. Choose the 70HP M7040SUH ROPS tractor or M7040DTHQ with factory air cond, cabin with Neilo Blade and optional optional clip on broom. The M7040's wheelbase is specifically lengthened by our engineers to facilitate greater blade angle and increased stability and clearance while grading. The Tractor/Grader Combo combines the M7040's advantages with Neilo's unique blade design to guarantee exceptional cutting and finishing performance no matter how hard the going. Our blade features additional hydraulic crowd, hydraulic side shift and the ability to slew 50 degrees on a level pain when at ground level, features not common to tractor type graders. The advantage of our unique design becomes apparent the moment you put this machine into service. Your Tractor Grader Combo is ready for work the moment we deliver, inclusive of registration, flashing beacon and on site operator training. At Neilo we like to make it easy. Features: Lengthened wheelbase for stability, clearance and heightened grading performance, LED beacon fitted as std. 2.44m mid mounted grader with reversible replaceable cutting edge, Hydraulic side shift & hydraulic crowd of grader blade fitted as std equipment,Blade will slew on level plain through 50 degrees at ground level. Optional 1.750m 5 section hydraulic drive broom available.
New Unused CASE 885B Motor Grader. (Year of Manufacture 2015) This unit has been imported as aged stock out of the U.S.A. and is being sold by AdvanceQuip, the CASE Construction Distributor in New Zealand. Machine is sold with a full 12 month warranty and FREE SERVICING for the first 2,000 Hours! This unit comes with a 14 ft moldboard, Rear Rippers and Front Push Blade. Fully specced with Diff-Lock and A/Cond Cabin. The CASE 885B is a proven performer in New Zealand. Brief Specifications as below: - FPT 205Hp VHP Engine - ZF 6-Speed Torque-Coverter Transmission with Lock-Up. - Operating weight 20.0t Some Unique Features of the CASE Grader: - Unique involuted Moldboard Design has multi-radius curves, cutting, mixing and rolling material off the moldboard in an effortless wave. - Front Articulation allows for a tight turning radius and also allows cab to be mounted further back, increasing visibility to the moldboard. - External Circle Teeth eliminate the need for slip clutches or shear pins and is a far less complex and more stronger design. - Hydraullically Lockable five-position saddle allows for Blade tilt up to 90 degrees both sides. Available ex-stock in Auckland, Christchurch and Gore.
2014 CAT 12M Motor Grader Hours: 6,020 Comes with: C-7, push block, 14FT MB, A/C, ROPS, Black cab model, Trimble ready, Ripper/ scarifier, 17.5x25 tyres, E-stops, isolator, UHF, full service history, final trim Machine.
Tidy Grader ready for work. Located in Whangarei.
2012 Cat 140M2 Motor Grader Hours: 3,800 Comes With: Push Block, 14ft MB, A/C ROPS Cab, Ripper/Scarifier, transmission guard, e-stops/ isolators/civil ready sticker kit, Wired for Trimble with EM400 Pole and chord.
Lo EROPS, 14' Board, MS ripper, PB, 17.5 tyres 4,950hrs
Year 2003, 12,460 Hours 14' Board, Rippers, Front Blade All Wheel Drive Grader Tidy Machine, Work Ready
New Unused CASE 885B Motor Grader. (Year of Manufacture 2015) This unit has been imported as aged stock out of the U.S.A. and is being sold by AdvanceQuip, the CASE Construction Distributor in New Zealand. Machine is sold with a full 12 month warranty and FREE SERVICING for the first 2,000 Hours! This unit comes with a 14 ft moldboard, Rear Rippers and Front Push Blade. Fully specced with Diff-Lock and A/Cond Cabin. The CASE 885B is a proven performer in New Zealand. Brief Specifications as below: - FPT 205Hp VHP Engine - ZF 6-Speed Torque-Coverter Transmission with Lock-Up. - Operating weight 20.0t Some Unique Features of the CASE Grader: - Unique involuted Moldboard Design has multi-radius curves, cutting, mixing and rolling material off the moldboard in an effortless wave. - Front Articulation allows for a tight turning radius and also allows cab to be mounted further back, increasing visibility to the moldboard. - External Circle Teeth eliminate the need for slip clutches or shear pins and is a far less complex and more stronger design. - Hydraullically Lockable five-position saddle allows for Blade tilt up to 90 degrees both sides. Special Price: $329,900+GST ($379,385 Incl. GST) Available ex-stock in Auckland, Christchurch and Gore.
The item you are attemping to add to compare is a different subtype to the items(s) in your list.
Only items of the same subtype may be compared.
