- List your item for as low as $40 - Advertise your item in both print and online
More Information
Are you a Dealer? Contact us to advertise: helpdesk@twrmedia.co.nz
Delays with machinery arriving on these shores have become almost standard over the past year, so it was a sense of relief that the McCormick X8 680 VT-Drive was finally...+MORE
Trade Safely. Use our anti-scam guide to protect yourself.
show
results
5mtrs working width Hydraulically adjustable levelling bars. 4 Rows of 12 x 32mm S-Tynes with rollers in front and behind tynes. Finished by a row of finger tynes, making it a great multi finishing tool. Can freight anywhere in New Zealand
Kverneland LD 5 furrow with packomat. It has new landslides, shares and points and has had a full workshop checkup. The packomat folds over with the plough and saves a second roller operation. Tidy...
Sows seeds at exact quantities, with precise spacing and depth. With the air vacuum, the seed is perfectly and gently metered A double disc planter. The disc blades cut in groove and the seed is placed in the protected shadow of the discs. The visible seed singulators work from both the inside and the outside of the seed line and are easily adjustable with levers. 4m sowing width 3.5m transport width with hydraulic retractable end units Popular model Very accurate and have a strong reputation for reliability. LOCATION: INVERCARGILL STOCKNO: UM42960
Hubbards Heavy duty Cultivator 6m working width Two rows of heavy chisel plow tines One row of levelling tines Two rows of heavy S tines Followed by a set of Stump Jump harrows Full cultivation system in one pass LOCATION: INVERCARGILL STOCKNO: UM42455
Excellent order 3.5metre Simba X-press three point linkage cultivator. Two rows of angle adjustment discs with plenty of life left and a following DD roller to consolidate and smooth out ready for ...
Triple box 3.0m trailing Aitchison tine drill with opening discs. The 20 tines are spaced at 150mm and the points are in good condition with plenty of life left in them. We have just put new openin...
KUHN HR3004 3mtr Power harrow One owner in mint condition On original tynes Rear Levelling board Maxi packer rear roller for firm finish and depth control Friction clutch Pto protection 1000rpm Very popular and respected model. Never available this tidy LOCATION: INVERCARGILL STOCKNO: UM43227
2012 Great Plains - Simba Xpress Discs with 3.0 Meter Working Width 5 leg ST Ripper Bar $25,000.00 Plus GS
Heavy Duty build for years of life The Contractors choice. 240 HP PTO Rating 1000 RPM 14 rotors on 3.5 mtrs with good overlap for a finer result faster 4 rotors per meter horsepower saving. Near New HD Quick Change tynes 18mm x 320mm Rear levelling bar with depth adjustment Powerful gear drive with big shafts and gearbed bearings Recently fully serviced and checked over. Tidy Order Tapered roller bearings to take thrust loadings for longer life, HD Rotor Shafts. Huge 550mm Dia Packer roller with scraper for a firm finish Driveshaft with Automatic Cam clutch LOCATION: INVERCARGILL STOCKNO: UM42980
3mtr Working Width 2 rows of scalloped 22/560mm discs at 250mm spacing Sealed disc hubs. SKF long life double row bearings. Heavy duty finger tines -adjustable Rear Rubber roller for depth control and compaction. High Speed (7-15km/hr) wide discs for greatest efficiency Excellent trash incorporation and mixing Huge work rates with superior fuel efficiency. Requires only 90hp+ Very good condition LOCATION: CHRISTCHURCH STOCKNO: UM43204
The item you are attempting to add to compare is a different subtype to the items(s) in your list.
Only items of the same subtype may be compared.
