New & Used Tillage And Seeding Equipment For Sale in Auckland

MA/AG EDV 750 - Three Point Linkage Offset Discs. 2.75 Mtr Working Width, 2.8 Mtr Transport Width. 610mm Disc Diameter, 5mm Thickness. 230mm Spacing. Front Gang Notched Discs, Rear Gang Plain, Scrapers On All Discs. Hydraulic Gang Adjustment. Very Little Work. Now Surplus To Requirements.

4 foot x 12mm The ATV combo harrows are suitable for spreading: Manure from horse and cattle Removing dead grass and compaction in pugged paddocks Over-sowing, light levelling and seeding lawns Can be used on surface maintenance in horse arenas Call or email for other sizes. Proudly made in NZ $655.00 + GST or $754.00 inc GST

Celli Pioneer 170 - 3.0 Mtr Working Width, Spike Rotor. 170 Hp Rated Gearbox. Two Piece Adjustable Frangor Tailgates.

Aitchison Superflow - 9 Leg Low Draft Subsoiler. 3.0 Mtr Working Width. Varaible Spaced Legs. Depth Control Land Wheels Good Solid Set Of Subsoilers.

Suitable for direct drilling, over sowing, light levelling and spreading horse or cattle manure. Rear spreader bar helps self-cleaning action and square section helps cut manure while the angle design spreads and smooths manure evenly. Round interlocking joining links mean less wear. Ideally suited for use behind tractors Proudly made in NZ $1485 + GST or $1708.00 inc GST

The Arena Groomer is used to enhance your arena for improved horse comfort and surface maintenance Easy to use on private/commercial arenas & pony clubs Double row of tynes free up the top surface and work on sand, pebble, rubber, clay mix & synthetics. The tynes easily adjust up and down to glide above your base course material. Side blade system pulls away that annoying edge build-up from the outer arena. The groomer tynes wind up easily to allow you to back into corners for full coverage. ATV tyres and hubs so no gouging issues from wheels and superior maneuvering. The rear finishing groomer has two options for different finishes Easily wind up and down of the rear groomer depth to suit your top surface whether it is fine or coarse. Three adjustment points: First adjusts the height to suit your towing vehicle (quad bike, side by side or Ute) Second adjusts the tyne angle and height to suit your surface depth requirements Third adjusts the rear finishing rake to apply more or less corrugation for the final finish. Can be powder coated or Galvanized finish Please inquire for wider or custom models Proudly made in NZ 1500 mm wide model $3850.00 + GST (best suited to quads, side by sides & Utes) Freight could be charged depending on location

Ex demo machine only 20 hours of work completed. (Tractor not include in price). Two rows of serrated concave discs with a diameter of 736 mm produce intensive mixing and crumbling. The legs are specially curved and coiled and thus provide maximum clearance between the discs. This prevents blockages, along with the slight offset of the middle discs. High speeds of travel at reduced slip result in lower fuel consumption and a higher acreage performance. An impact harrow behind the first row of discs produces intensive mixing and crumbling

DUNCAN 310 CAMBRIDGE ROLLER - Stocking dealer for Duncan Ag product Call now for pricing. Following features as standard equipment: Rubber encased roller axle bearings 3" roller axles Jack stand Sa...