Used Farm Machinery For Sale from $40,000 to $45,000

Landini Powerfarm 85 with Trima self-leveling loader and bucket, Done only 1355 hours, Wet clutch Hi/Lo Tidy unit,

Kinghitter 5m expander mast with Series 5 base represents a feat of design and engineering. It combines a huge rear shift on a main carriage frame with 1,550mm movement, and a slew ring pivot system with 200 degrees of rotation, to result in a massive 6m3 of operating area. Another sliding shift is incorporated into the slew ring design to give another 190mm movement in any direction the post driver is facing, while a secondary slider works in conjunction with the main carriage shift to give 300mm extra reach out each side of the tractor. 5m Expander Mast with: - 340KG Lead Filler Hammer - 6 + 6 Valve Banks - Hydraulic Side tilt - Auger Kit 100mm, 150mm,300mm Augers Series 5 Base: - 180 Degree Rotation - 1550mm Rear shift - 200mm Centre shift (in slew) - 300mm side shift - 2x hydraulic legs Note (yellow top link in pictures do not include ) $40,000 plus GST SU# OBO-JH view at 13 McGlashan Street, Mosgiel

Case IH Farmall C 75 - 75 Hp, 4WD, ROPS. Wet Clutch, 12 x 12 Transmission, Rear Wheel Weights. 1750 Hours. One Owner From New. Sold And Serviced By Us.

Used 2022 XCMG XE35U 4.0 ton Excavator. This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 108 Hours (Machine still in use, so hours may change) Located Gore This machine runs a Yanmar 3TNV88F 24.7 Hp Engine and Rexroth Load-Sensing Pump. This very tidy, low hour unit is very well set up with the below options: A/Cond Cab, Rubber Tracks, Blade, Dual Auxiliary Piping, Hydraulic Hitch, Attach2 1,200mm Tilt Bucket, Dig Bucket, Trench Bucket, Anti-Drop Valves, E-Stops. Hour Meter: 200.4 Hours (Machine still in use, so hours may change) Located Gore

AM FM RADIO AUXILIARY HYDRAULICS BEACON BOOM CHECK VALVE CARBODY, STANDARD CERTIFIED ROPS FRAME COUPLER, HYDRAULIC DIG BUCKET FULL LENGTH TRACK GUIDING GUARDS LIGHTING PILOT CONTROL ROPS CAB STICK CHECK VALVE STICK, MEDIUM THUMB, HYDRAULIC TILT BUCKET UNDERCARRIAGE, LONG GENERAL APPEARANCE * Cleaning Required: No * Extra Fuel Tanks: No * Car Body: Good * Counterweight: Good * Crankcase Guard / Battery Box: Good * Decals: Fair * Draw Bar: Good * Eng. Enclose Hood / Stack: Good * Engine Doors: Good * Fuel Tank: Good * Grab Irons: Good * Hood: Good * Main Frame Welds: Good * Paint: Good * Plastic: Fair * Radiator Grill & Shroud: Good * Sheet Metal: Good * Steps / Ladder: Good SAFETY ITEMS * Cab Guards: Yes * ROPS: Yes * Safety Decals In Place: Yes * Safety Decals Legible: Yes * Brake Hold: Good * Swing Brake: Good GAUGES, OPERATOR STATION, CONSOLE * Current O&MM: Yes * ROPS Certification Plate: Yes * Air Conditioner: Fair * Dash Console: Good * Door Latches: Good * EMS Panel / Warnings: Good * Floor Boards: Good * Gauges: Good * Glass/Mirrors: Good * Heater: Fair * Meter: Good * Seat Belt: Good * Seat Cushion / Arm Rest: Good * Switches: Good * Windshield Wipers: Good ENGINE * Blow By: No * Compression in Radiator: No * Fluid Levels OK?: Yes * Knocking: No * Oil Leaks: No * Water in Oil: No * Air Cleaners: Good * Belts / Pulleys: Good * Engine Supports: Good * Exhaust / Muffler: Good * Fuel Injection System: Good * Operating Condition - ENGINE: Good * Turbocharger / Blower: Good COOLING SYSTEM * Leaks: No * Coolers: Good * Fan: Good * Fan Drive: Good * Hoses: Good * Radiator: Good * Water Pump: Good ELECTRICAL, STARTING AND CHARGING SYSTEM * Block Heater: No * Ether Aid: No * Alternator: Good * Batteries / Cables: Good * Lighting: Good * Starter: Good * Wiring: Good HYDRAULICS * Boom Cylinder: Good * Bucket Cylinder: Good * Control Linkage: Good * Hose Lines: Good * Hydraulic Swivel: Good * Operating Condition - HYDRAULICS: Good * Pump Drive: Good * Pumps & Valves: Good * Stick Cylinder: Good * Swing Gear: Good * Swing Motors: Good * Tank: Good * Thumb Cylinder: Good * Travel Motors: Good ATTACHMENTS / WORK TOOLS * Auger: No * Claw: No * Crusher: No * Grapple: No * Hammer: No * Pulverizer: No * Rake: No * Ripper: No * Shear: No * Thumb: Yes * Tilting Ditch Bucket: Yes * Vibratory Plate: No BOOM * Boom Condition: Good * Boom Pins: Fair * Pins & Bushings - BOOM: Fair STICK * Pins & Bushings - STICK: Fair * Stick Conditions: Good * Stick Pins: Fair BUCKET * Quick Coupler: Yes * Bucket Bottom: Good * Bucket Linkage: Good * Bucket Mounts: Good * Bucket Sides: Good * Cutting Edges: Good * Teeth / Adapters: Good UNDERCARRIAGE * Average Life Remaining - UNDERCARRIAGE: 40% * Track Frame - Left: Good * Track Frame - Right: Good FINAL DRIVES * Housings: Good * Planetaries / Diff: Good

Sam 10 Cube Feedwagon. Side feed. Swivel coupler and remote greasing. Suit new buyer. Great condition!!!

New aged stock clearance 500/60R22.5 Radials x 8 Stud Wheels Hydraulic Brakes, Front Axle only 5m...

Kuhn Profile 1880 Mixer Wagon, 18 cube, single axle, front conveyor with side extension, NEW AUGERS, workshop checked and ready to go Located in Cambridge

2013 Tandem axle Approx 31000 Bales been through workshop 1.00 to 1.50m bale diameter Tidy baler

John Deere 5075E with Stoll loader. Only 1476 hours! great rubber and in overall excellent condition.