Farm Machinery

Price Range
Recently Listed
Seller Location
Radius (km)
Find Dealers
Seller Location
Radius (km)
Dealer Name or Keywords

Farm Machinery For Sale from $20,000 to $25,000

Trade Safely. Use our anti-scam guide to protect yourself.

190 result(s)
Sort by

show

results

  • RefCode: TA744167
  • Cutting Width - mm: 2,500
  • Power Rating - Hp: 220

Heavy Duty 2.5m Mulcher

CALL 037481210
  • RefCode: TA981246
  • Class: Offset Discs

Farmers nationwide are enjoying the simplicity, penetration and tidy discing job the 930s give. Heavy enough for all primary tasks, and awesome out-of-crop mixing and burying performance. Running 4AGs patented Terraflex bearing mount system, identical to the largest machines in our range, this over-engineered bearing setup means years of peace of mind in the business end of the discs. Operator-friendly hydraulic tuning of settings gives perfect level finish from the tractor seat. Dont compromise on quality and performance of your primary tillage gear and buy wisely in the knowledge you are getting the best of both worlds EUROPEAN QUALITY + NZ DESIGN DNA.

CALL 06 8256402
  • RefCode: TA981509
  • Class: Aerator

The European built Hektor 300 subsoiler is a seriously well-built piece of kit suited up to 280Hp tractors. The action of the cranked leg and wide flat-lift shares under the ground, has a serious lifting effect, and shatters across full working width. You can see the huge wave in the surface profile as the machine goes past. The ground is not disturbed on the surface due to the way the legs slice through surface, and the large diameter heavy cage roller really pushes the dirt/turf back down. In pasture you can hardly see the cut from each leg, even without coulters. All of the legs are protected by hydraulic trip protection (independent accumulator for each leg). Depth control is on large hydraulic cylinders connected to the rear roller, this has a very simple spacer system to allow you to quickly set the working depth. 4 legs over 3.0mtrs makes for easy pulling (min 150Hp). Breathe life into damaged crop and pasture ground with this machine!

CALL 06 8256402
  • RefCode: TA948190
  • Class: 0-7 tonnes
  • Category: Mini Excavator

Late model, low 1561 hours, clean and tidy 1.5 tonne with a pivot boom, tilt weed and dig bucket, expanding tracks, blade and ROPS canopy - full AUX plumbing, good rubber tracks (so low footprint), serviced and checked. The offset boom allows better reach, the expanding tracks mean you can squeeze through those gaps. The bucket is 880mm wide and we are happy to price your other requirements up for you. Currently sorting some paintwork and stickers, this digger would be a gem for landscaping, plumbing or a lifestyle block. === WE DELIVER NZ WIDE ASK FOR A QUOTE Summer Promo.... FINANCE AVAILABLE AT A CRAZY 7.5%!! T'S AND C'S APPLY LIMITED TIME ONLY =====

CALL 037443829
  • RefCode: TA976781
  • Class: Air Seeders
  • Working Width - m: 0

THIS 6 METRE TINE AIR SEEDEER IS LIKE NEW.

CALL 06 8243686
  • RefCode: TA361702
  • Class: 0-40hp
  • Drive Type: 4WD
  • FEL: YES
  • Rated Engine Power - hp: 26
  • Usage Hours: 15

What a Deal - 26hp, hydrostatic trans, 60 inch mowing deck, Front end loader on industrial tyres, 2 years 2000 hour warranty. Delivered in North Island no charge.

CALL 06 8256404
  • RefCode: TA927261
  • Class: Drills
  • Working Width - m: 3

VADASTAD 300 CARRIER DRILL Make VADERSTAD Model Carrier Drill 300 Capacity Seedbox Capacity - litres 1,100 No of Disc or Tine 24 Discs Tine Rank Stagger - mm 2 Rows Row Spacing - mm 125 Driveline Working Speed - kph 2 to 18 Minimum Power Required - kw 90 Dimensions and Weight Working Width - m 3 Unit Empty Weight - kg 2400 Transport Width - mm 3000 Prices are plus GST

CALL 06 8256416
  • RefCode: TA991067
  • Class: 100-150hp
  • Drive Type: 4WD
  • Rated Engine Power - hp: 135
  • Usage Hours: 13,759

6910 powerquad with left hand shuttle. Front linkage, near new front tyres.

CALL 07 9817548
  • RefCode: TA831203
  • Class: Drills

Tine drill, 3.320m width, 18 row, 2.7m sowing width & 150mm row spacings

CALL 07 9856886
  • RefCode: TA980211
  • Working Width - mm: 0

7.5m working width Hydraulic levelling paddles Rear drawbar c/w 5 hoses New points Rear crumbler roller in excellent order Very tidy machine StockNo: UM41729

CALL 037413223
190 result(s)
Sort by

show

results

The information contained within classified listings on Farmtrader.co.nz is generated by the private and dealer advertisers. Please confirm listing details including price and specifications directly with the seller.