Showing all items for FARMCHIEF MACHINERY LTD

3m working width New New points Rear tailgate Packer roller with scrapers Slip clutch Very tidy unit Fully workshop checked LOCATION: CHRISTCHURCH STOCKNO: UM43000

Heavy duty adjustable leaf spring breakout system Brand new hard faced reversible points Adjustable rubber depth control wheels 2 year old tidy ripper LOCATION: INVERCARGILL STOCKNO: UM42598

11 Tines 3mtr Working width with 290mm tine spacing 250 to 450mm Working depth, Under beam clearance of 870 mm Double row of stagger on 100 x 100 mm chassis Wear plate standard with bolt on point Leaf spring Non-stop Auto Reset HD top tow hitch Side depth control wheels Intensive mixing and good residues flow. Release the water, Dry the soil, save time and get better crops LOCATION: INVERCARGILL STOCKNO: UM43286

3.6m working width Twin oscillating tyres Galvanized frame Water filled top beam Like new condition Save $$ on New LOCATION: CHRISTCHURCH STOCKNO: UM43196

Aerate for Improved drainage = less pugging, Deeper roots = strong, more resilient plants, Let air into the soil = better utilisation of fertiliser and nutrients Shatters pan = much reduced risk of leaching, Grows more grass or crops = its proven. Double Bar V shape design for easier pulling as the legs are not forcing against each other. This results in savings of time and fuel of up to 20% Designed for large horsepower tractors in tough going. Requires approx. 25hp per leg HD 16mm leg with shearbolt protection 500mm leg spacing suit 250 to 350mm depth. Max 450mm Heavy water-filled 330mm roller with toplink adjustment for depth control and tidy finish Economical replaceable wear points and shin plates Coulter blades with adjustment for tidy cut. 18 inch Coulters to slice pasture. Tapered bearing hubs LOCATION: INVERCARGILL STOCKNO: UM43136

32 Blade 3.6m Good penetration with these discs Easy pulling Recent new bearings. LOCATION: INVERCARGILL STOCKNO: UM42854

2.5 metre wide Suitable for up to 120Hp tractors Packer roller for firm finish Gear drive side drive Spring loaded tailgate for better levelling of ground Well supported spikes with high grade steel for withstanding objects and hard ground Optional Auto torque limiter clutch on drive shaft 60mm distance between tyres for tine working of the ground LOCATION: INVERCARGILL STOCKNO: UM42684

5 Furrow 16" Hydraulic steering. High speed mould boards. Rock jumper coulters. On land or in furrow ploughing Hydraulic front furrow wheel Heavy duty plough NZ built for NZ conditions. LOCATION: INVERCARGILL STOCKNO: UM43065

Kuhn EL 162-300 Rotary Hoe with fine tilth knife rotor Working width of 3mtrs/10ft 540 Rpm input for a rotor speed of 235/277rpm 1000 Rpm input for a rotor speed of 258/361/236/296/160 rpm Suited to tractor 100 to 170hp Gear drive and PTO torque protection Good order. One owner from new LOCATION: INVERCARGILL STOCKNO: UM43119

Knife blades for excellent penetration into hard ground, bury trash Phased blade timing for lower power requirement and smoother running One pass to a fine seed bed Central Gearbox with drive to center of rotor, Less moving parts and extra bearing support No side Drive Reduces overall width close to working width Spring loaded rear tail door Rear levelling bar with adjusters and linked to rear roller P.T.O Drive shaft with Friction slip clutch LOCATION: INVERCARGILL STOCKNO: UM43176